SICK WL4SLC-3P2232A72 光电传感器

SICK

SICK WL4SLC-3P2232A72 光电传感器

订货号: 1098509

SICK WL4SLC-3P2232A72 光电传感器 — datasheet、规格参数、订货号查询与原装正品采购

获取报价 / 询盘

立即询价 WhatsApp 询盘 邮件询价

产品概述

工作原理镜反射式光电传感器
工作原理详细信息无反射镜最小距离(自动对准/同轴光学元件)
最大开关距离0 m ... 12 m 1)
感应距离0 m ... 8 m 1)
偏振过滤器是 发射光束
光源激光 2)
光源种类可见红光
光斑尺寸(距离)Ø 1 mm (500 mm) 激光器特征值
标准性参考EN 60825-1:2014, IEC 60825-1:2014 / CDRH 21 CFR 1040.10 & 1040.11
激光等级1 3)
轴长650 nm
设置IO-Link, 单示教按键
必要配件附加传感器(例如 WL4SL-3P2232,1061561),智能传感器 Y 型分配器 SYL-8204-G0M11-X2 (6055012),2 x 连接电缆(例如 YF8U14-C60VA3M8U14,2096612),2 x 反光板(例如 P250F,5308843)
孔型M3 1) 反射器 PL80A.2) 平均使用寿命:50,000 h,TU = +25 °C.3) 禁止刻意直视激光光束。不得将激光光束对准人眼。.

技术规格

Safety-related parameters
MTTFD562 years (EN ISO 13849-1) 1)
DCavg0 %
TM (mission time)10 years 1) Mode of calculation: Parts-Count-calculation. ## Communication interface
IO-Link✔ , IO-Link V1.1
Data transmission rateCOM2 (38,4 kBaud)
Cycle time2.3 ms
Process data length16 Bit
Process data structureBit 0 = switching signal QL1 Bit 1 = Detection signal Qint.1 Bit 2 ... 15 = measuring value
VendorID26
DeviceID HEX0x800222
DeviceID DEC8389154
Compatible master port typeA
SIO mode supportYes
Electronics
Supply voltage UB10 V DC ... 30 V DC 1)
Ripplepp 2)
Current consumption30 mA 3)
Protection classIII Digital output
TypePNP 4)
Switching modeLight/dark switching 4)
Output current Imax.≤ 100 mA
Response time≤ 0.5 ms 6)
Repeatability (response time)150 µs 7)
Switching frequency1,000 Hz 8)
Output functionComplementary
Circuit protectionA 9)B 10)C 11)
Response time Q/ on Pin 2300 µs ... 450 µs 6) 7)
Switching frequency Q / to pin 21,000 Hz 12) 1) Limit values when operated in short-circuit protected network: max. 8 A.2) May not fall below or exceed UV tolerances.3) Without load.4) Q = light switching.5) Pin 4: This switching output must not be connected to another output.6) Signal transit time with resistive load.7) Valid for Q \ on Pin2, if configured with software.8) With light/dark ratio 1:1.9) A = VS connections reverse-polarity protected.10) B = inputs and output reverse-polarity protected.11) C = interference suppression.12) With light / dark ratio 1:1, valid for Q \ on Pin2, if configured with software.
Mechanics
HousingRectangular
Design detailSlim
Dimensions (W x H x D)12.2 mm x 41.8 mm x 17.3 mm
ConnectionMale connector M8, 4-pin Material
HousingPlastic, Novodur
Front screenPlastic, PMMA
Weight100 g
Ambient data
Enclosure ratingIP66IP67
Ambient operating temperature–10 °C ... +50 °C
Ambient operating temperature extended–30 °C ... +55 °C 1) 2)
Ambient temperature, storage–30 °C ... +70 °C
UL File No.NRKH.E181493 1) As of Ta = 50 °C, a max. supply voltage Vmax. = 24 V and a max. load current Imax. = 50 mA is permitted.2) Operation below Tu –10 °C is possible if the sensor is already switched on at Tu > –10 °C, then cools down, and the supply voltage is subsequently not switched off. Switching on below Tu –10 °C is not permissible. ## Smart Task
Smart Task nameSpeed and Length Monitoring
Measurement modeSpeedLengthLength incremental
Relative measurement error related to the measured value≤ 1 %
Resolution measurement value1 mm / 1 mm/s
Logic functionWINDOW
Timer functionImpulse width, impulse shift
Max. pulse frequency at the external input (pin 2 / white wire)≤ 1,000 Hz Switching signal
Switching signal QL1Switching output to measuring value switching thresholds
Measuring valueSpeed measurement value / length measurement value ## Diagnosis
Device statusYes
Quality of teachYes
Quality of runYes, Contamination display ## Certificates
EU declaration of conformity✔
UK declaration of conformity✔
ACMA declaration of conformity✔
Moroccan declaration of conformity✔
China RoHS✔
China Compulsory Product Certification (CCC) exempt✔
ECOLAB certificate✔
Laser safety (IEC 60825-1) certificate✔
Information according to Art. 3 of Data Act (Regulation EU 2023/2854)✔ ## Classifications

下载资料