SICK WL4SLC-3P2232A70 光电传感器

SICK

SICK WL4SLC-3P2232A70 光电传感器

订货号: 1080947

SICK WL4SLC-3P2232A70 光电传感器 — datasheet、规格参数、订货号查询与原装正品采购

获取报价 / 询盘

立即询价 WhatsApp 询盘 邮件询价

产品概述

工作原理镜反射式光电传感器
工作原理详细信息无反射镜最小距离(自动对准/同轴光学元件)
最大开关距离0 m ... 12 m 1)
感应距离0 m ... 8 m 1)
偏振过滤器是 发射光束
光源激光 2)
光源种类可见红光
光斑尺寸(距离)Ø 1 mm (500 mm) 激光器特征值
标准性参考EN 60825-1:2014, IEC 60825-1:2014 / CDRH 21 CFR 1040.10 & 1040.11
激光等级1 3)
轴长650 nm
设置IO-Link, 单示教按键
特殊应用检测小型物体
孔型M3
针脚 2 配置外部输入端, 示教功能输入端, 发射器关闭输入端, 检测输出端, 逻辑输出端, 设备脏污报警输出 1) 反射器 PL80A.2) 平均使用寿命:50,000 h,TU = +25 °C.3) 禁止刻意直视激光光束。不得将激光光束对准人眼。.

技术规格

Safety-related parameters
MTTFD562 years (EN ISO 13849-1) 1)
DCavg0 %
TM (mission time)10 years 1) Mode of calculation: Parts-Count-calculation. ## Communication interface
IO-Link✔ , IO-Link V1.1
Data transmission rateCOM2 (38,4 kBaud)
Cycle time2.3 ms
Process data length16 Bit
Process data structureBit 0 = switching signal QL1 Bit 1 = switching signal QL2 Bit 2 ... 15 = measuring value
VendorID26
DeviceID HEX0x800111
DeviceID DEC8388881
Compatible master port typeA
SIO mode supportYes
Electronics
Supply voltage UB10 V DC ... 30 V DC 1)
Ripplepp 2)
Current consumption30 mA 3)
Protection classIII Digital output
TypePNP 4) 5)
Switching modeLight/dark switching 4)
Output current Imax.≤ 100 mA
Response time≤ 0.5 ms 6)
Repeatability (response time)150 µs 7)
Switching frequency1,000 Hz 8)
Output functionComplementary
Circuit protectionA 9)B 10)C 11)
Response time Q/ on Pin 2300 µs ... 450 µs 6) 7)
Switching frequency Q / to pin 21,000 Hz 12) 1) Limit values when operated in short-circuit protected network: max. 8 A.2) May not fall below or exceed UV tolerances.3) Without load.4) Q = light switching.5) Pin 4: This switching output must not be connected to another output.6) Signal transit time with resistive load.7) Valid for Q \ on Pin2, if configured with software.8) With light/dark ratio 1:1.9) A = VS connections reverse-polarity protected.10) B = inputs and output reverse-polarity protected.11) C = interference suppression.12) With light / dark ratio 1:1, valid for Q \ on Pin2, if configured with software.
Mechanics
HousingRectangular
Design detailSlim
Dimensions (W x H x D)12.2 mm x 41.8 mm x 17.3 mm
ConnectionMale connector M8, 4-pin Material
HousingPlastic, Novodur
Front screenPlastic, PMMA
Weight100 g
Ambient data
Enclosure ratingIP66IP67
Ambient operating temperature–10 °C ... +50 °C
Ambient operating temperature extended–30 °C ... +55 °C 1) 2)
Ambient temperature, storage–30 °C ... +70 °C
UL File No.NRKH.E181493 1) As of Ta = 50 °C, a max. supply voltage Vmax. = 24 V and a max. load current Imax. = 50 mA is permitted.2) Operation below Tu –10 °C is possible if the sensor is already switched on at Tu > –10 °C, then cools down, and the supply voltage is subsequently not switched off. Switching on below Tu –10 °C is not permissible. ## Smart Task
Smart Task nameTime measurement + debouncing
Logic functionDirectWINDOW
Timer functionDeactivatedSwitch-on delayOff delayON and OFF delayImpulse (one shot)
InverterYes
Time measurement accuracySIO Direct: --- 1)SIO Logic: - 0,7 ... + 0,7 ms ± 0,5 % of time measurement value 2)IOL: - 0.9 ... + 0.9 ms ± 0.5% of the time measurement 3)
Time measurement accuracy (e.g. accuracy for time measurement value = 1 s )SIO Direct: --- 1)SIO Logic: - 5,7 ... + 5,7 ms 2)IOL: - 5,9 ... + 5,9 ms 3)
Resolution time measuring value1 ms
Min. Time between two process events (switches)SIO Direct: ---SIO Logic: 450 µsIOL: 500 µs
Debounce time max.SIO Direct: --- 1)SIO Logic: 30.000 ms 2)IOL: 30.000 ms 3) Switching signal
Switching signal QL1Output type (dependant on the adjusted threshold)
Switching signal QL2Output type (dependant on the adjusted threshold)
Measuring valueTime measurement value 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to "direct"/"deactivated").2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters. ## Diagnosis
Device statusYes
Quality of teachYes
Quality of runYes, Contamination display ## Certificates
EU declaration of conformity
UK declaration of conformity
ACMA declaration of conformity
Moroccan declaration of conformity
China RoHS
China Compulsory Product Certification (CCC) exempt
ECOLAB certificate
IO-Link certificate
Laser safety (IEC 60825-1) certificate
Information according to Art. 3 of Data Act (Regulation EU 2023/2854)✔ ## Classifications
ECLASS 5.1.427270903
ECLASS 6.027270903
ECLASS 7.027270903
ECLASS 8.027270903
ECLASS 9.027270903
ECLASS 10.027270903
ECLASS 11.027270903
ECLASS 12.027270903
ECLASS 13.027270903
ECLASS 14.027270903
ECLASS 15.027270903
ETIM 6.0EC002719
ETIM 7.0EC002719
ETIM 8.0EC002719
ETIM 9.0EC002719
ETIM 10.0EC002719
UNSPSC 091201.032151804
UNSPSC 100501.032151804
UNSPSC 111201.032151804
UNSPSC 120901.032151804
UNSPSC 131201.032151804
UNSPSC 140801.032151804
UNSPSC 151101.032151804
UNSPSC 160901.032151804
UNSPSC 171001.032151804
UNSPSC 180801.032151804
UNSPSC 190501.032151804
UNSPSC 200601.032151804
UNSPSC 210901.032151804
UNSPSC 220601.032151804
UNSPSC 230701.032151804
UNSPSC 240301.032151804
UNSPSC 250901.032151804
UNSPSC 260801.032151804

下载资料