IFM
IFM PQS816 压力传感器
用于气动装置的压力传感器
IFM PQS816 压力传感器 — datasheet、规格参数、订货号查询与原装正品采购
获取报价 / 询盘
产品亮点
- 气动和压缩空气系统中系统压力的可靠监控
- 耐极高过压和真空
- 清晰可见的TFT显示屏
- 红/绿显示，用于明确标识可接受的范围
- 带可编程开关输出
- 方便的按钮操作或通过IO-Link进行参数设置
产品概述
| 产品标识 | 电子压力传感器 |
| 应用 | 用于工业应用 |
| 系统接口 | 螺纹连接 G 1/8 内螺纹 (2x) |
| 工作电压DC | 18...30 V |
| 电压类型 | DC |
| 电气设计 | PNP/NPN |
| 输出数量 | 2 |
| 输出功能 | 常开/常闭; (可设定参数) |
| 输出信号 | 开关信号; IO-Link; (可配置) |
| 测量范围 | -1...1 bar-1000...1000 mbar-100...100 kPa |
| 接口 | M8 接插件 |
| 原材料 | PBT; PC; TPE; 丁晴橡胶; FKM; 黄铜; 硅(镀层) |
| 材料(接液部件) | PBT; FKM; 黄铜; 硅(镀层) |
| 显示 | 显示 1": 128 x 96 像素; 开关状态: 2 x LED 黄色 |
| 环境温度 | 0...60 °C |
| 介质温度 | 0...60 °C |
| 通信接口 | IO-Link |
| 产品 | 易福门或同价值的 |
| 型号 | PQS816 |
技术规格
| Product characteristics | |
| Number of inputs and outputs | Number of digital outputs: 2 |
| Measuring range | -1...1 bar -1000...1000 mbar -100...100 kPa |
| Process connection | threaded connection G 1/8 internal thread (2x) |
| Application | |
| Special feature | Gold-plated contacts |
| Application | for industrial applications |
| Media | compressed air; nitrogen (N2) |
| Conditionally suitable for | other media on request |
| Medium temperature[°C] | 0...60 |
| Min. burst pressure | |
| 20 bar | 2 MPa |
| Pressure rating | |
| 10 bar | 1 MPa |
| Vacuum resistance | |
| -1000 mbar | -0.1 MPa |
| Type of pressure | relative pressure; vacuum |
| Electrical data | |
| Operating voltage[V] | 18...30 DC |
| Current consumption[mA] | < 30 |
| Min. insulation resistance[MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] | 0.3 |
| Integrated watchdog | yes |
| Inputs / outputs | |
| Number of inputs and outputs | Number of digital outputs: 2 |
| Outputs | |
| Total number of outputs | 2 |
| Output signal | switching signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN; (configurable) |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] | 2.5 |
| Permanent current rating of switching output DC[mA] | 100 |
| Switching frequency DC[Hz] | < 170 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Measuring/setting range | |
| Measuring range | -1...1 bar -1000...1000 mbar -100...100 kPa |
| Set point SP | |
| -1000...1000 mbar | -100...100 kPa |
| In steps of | |
| 1 mbar | 0.1 kPa |
| Accuracy / deviations | |
| Switch point accuracy[% of the span] | < ± 0,5 |
| Repeatability[% of the span] | < ± 0,1; (with temperature fluctuations < 10 K:) |
| Characteristics deviation[% of the span] | < ± 0,5; (including linearity, hysteresis and repeatability) |
| Linearity deviation[% of the span] | < ± 0.5 % (limit value setting according to DIN EN IEC 62828-1) |
| Hysteresis deviation[% of the span] | < ± 0,25 |
| Long-term stability[% of the span] | < ± 0,1; (per year) |
| Temperature coefficient zero point[% of the span / 10 K] | 0,2 |
| Temperature coefficient span[% of the span / 10 K] | 0,2 |
| Response times | |
| Response time[ms] | 6 |
| Damping process value dAP[s] | 0...4 |
| Damping for the analogue output dAA[s] | 0...99.99 |
| Software / programming | |
| Parameter setting options | display can be rotated and switched off; Teach function; simulation function; diagnostic function |
| Interfaces | |
| Communication interface | IO-Link |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1.3 |
| SDCI standard | IEC 61131-9: 2019-06 |
| Profiles | |
| Smart Sensor - SSP 4.1.1 | Measuring and Switching Sensor, 1 channel |
| BLOB | Binary Large Object transfer |
| Common - I&D | Identification and Diagnosis |
| Extension | Quantity detection, switches when value exceeds the setpoint |
| Function | Locator |
| Function | ProductURI |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 1 |
| Process data binary | 2 |
| Min. process cycle time[ms] | 0.6 |
| IO-Link resolution pressure[bar] | 0.0001 |
| IO-Link process data (cyclical) | |
| function | bit length |
| pressure | 16 |
| device status | 4 |
| SSC1.1 | 1 |
| SSC1.2 | 1 |
| IO-Link functions (acyclical) | application specific tag; internal temperature; Medium temperature |
| Supported DeviceIDs | |
| Type of operation | DeviceID |
| default | 1744 |
| Operating conditions | |
| Ambient temperature[°C] | 0...60 |
| Storage temperature[°C] | -25...85 |
| Protection | IP 65 |
| Tests / approvals | |
| EMC | |
| DIN EN 61326-1 | |
| Shock resistance | |
| DIN EN 60068-2-27 | 50 g (11 ms) |
| Vibration resistance | |
| DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
| MTTF[years] | 508 |
| UL approval | |
| UL approval no. | J065 |
| File number UL | E174189 |
| Pressure Equipment Directive | Sound engineering practice; can be used for stable gases fluid group 2 |
| Mechanical data | |
| Weight[g] | 52.9 |
| Housing | rectangular |
| Dimensions[mm] | 37.7 x 30 x 38.6 |
| Materials | PBT; PC; TPE; NBR; FKM; brass; silicon (coated) |
| Materials (wetted parts) | PBT; FKM; brass; silicon (coated) |
| Min. pressure cycles | 50 million |
| Process connection | threaded connection G 1/8 internal thread (2x) |
| Displays / operating elements | |
| Display | |
| Display 1" | 128 x 96 pixels |
| switching status | 2 x LED, yellow |
| Display unit | mbar; kPa; mmHg; kgf/cm² |
| Accessories | |
| Items supplied | head cap screw: 2 x (M3 x 8 mm) |
| Remarks | |
| Pack quantity | 1 pcs. |
| Electrical connection | |
| Connector | 1 x M8; coding: A; Contacts: 4, gold-plated |
下载资料
- PQS816 (638 KB)