IFM
IFM PQC612 压力传感器
用于气动装置的压力传感器
IFM PQC612 压力传感器 — datasheet、规格参数、订货号查询与原装正品采购
获取报价 / 询盘
产品亮点
- 气动和压缩空气系统中系统压力的可靠监控
- 耐极高过压和真空
- 清晰可见的TFT显示屏
- 红/绿显示，用于明确标识可接受的范围
- 带有可编程的开关输出和模拟输出
- 方便的按钮操作或通过IO-Link进行参数设置
产品概述
| 产品标识 | 电子压力传感器 |
| 应用 | 用于工业应用 |
| 系统接口 | 螺纹连接 1/8" NPT 内螺纹 (2x) |
| 工作电压DC | 18...30 V |
| 电压类型 | DC |
| 电气设计 | PNP/NPN |
| 输出数量 | 2 |
| 输出功能 | 常开/常闭; (可设定参数); 模拟 |
| 输出信号 | 开关信号; 模拟信号; IO-Link; (可配置) |
| 模拟电流输出 | 4...20, 可逆; (可调整量程) mA |
| 模拟电压输出 | 0...10 / 1...5, 可逆; (可调整量程) V |
| 测量范围 | -1...10 bar-14.5...145 psi |
| 接口 | M8 接插件 |
| 原材料 | PBT; PC; TPE; 丁晴橡胶; FKM; 黄铜; 硅(镀层) |
| 材料(接液部件) | PBT; FKM; 黄铜; 硅(镀层) |
| 显示 | 显示 1": 128 x 96 像素; 开关状态: 1 x LED 黄色 |
| 环境温度 | 0...60 °C |
| 介质温度 | 0...60 °C |
| 通信接口 | IO-Link |
| 产品 | 易福门或同价值的 |
| 型号 | PQC612 |
技术规格
| Product characteristics | |
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Measuring range | |
| -1...10 bar | -14.5...145 psi |
| Process connection | threaded connection 1/8" NPT internal thread (2x) |
| Application | |
| Special feature | Gold-plated contacts |
| Application | for industrial applications |
| Media | compressed air; nitrogen (N2) |
| Conditionally suitable for | other media on request |
| Medium temperature | |
| 0...60 °C | 32...140 °F |
| Min. burst pressure | |
| 20 bar | 290 psi |
| Pressure rating | |
| 15 bar | 220 psi |
| Vacuum resistance | |
| -1000 mbar | -14.5 psi |
| Type of pressure | relative pressure; vacuum |
| Electrical data | |
| Operating voltage[V] | 18...30 DC |
| Current consumption[mA] | < 30 |
| Min. insulation resistance[MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] | 0.3 |
| Integrated watchdog | yes |
| Inputs / outputs | |
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Outputs | |
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN; (configurable) |
| Number of digital outputs | 1 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] | 2.5 |
| Permanent current rating of switching output DC[mA] | 100 |
| Switching frequency DC[Hz] | < 170 |
| Number of analogue outputs | 1 |
| Analogue current output[mA] | 4...20, invertible; (scalable) |
| Max. load[Ω] | 500 |
| Analogue voltage output[V] | 0...10 / 1...5, invertible; (scalable) |
| Min. load resistance[Ω] | 2000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Measuring/setting range | |
| Measuring range | |
| -1...10 bar | -14.5...145 psi |
| Set point SP | |
| -1...10 bar | -14.5...145 psi |
| Analogue start point | |
| -1...8 bar | -14.5...116 psi |
| Analogue end point | |
| 1...10 bar | 14.5...145 psi |
| In steps of | |
| 0.01 bar | 0.1 psi |
| Accuracy / deviations | |
| Switch point accuracy[% of the span] | < ± 0,5; (turn down 1:1) |
| Repeatability[% of the span] | < ± 0,1; (with temperature fluctuations < 10 K: turn down 1:1) |
| Characteristics deviation[% of the span] | < ± 0,5; (turn down 1:1; including linearity, hysteresis and repeatability) |
| Linearity deviation[% of the span] | < ± 0.5 % (limit value setting according to DIN EN IEC 62828-1) turn down 1:1 |
| Hysteresis deviation[% of the span] | < ± 0,25; (turn down 1:1) |
| Long-term stability[% of the span] | < ± 0,1; (turn down 1:1; per year) |
| Temperature coefficient zero point[% of the span / 10 K] | 0,2; (Turn down 1:1) |
| Temperature coefficient span[% of the span / 10 K] | 0,2; (Turn down 1:1) |
| Response times | |
| Response time[ms] | 6 |
| Damping process value dAP[s] | 0...4 |
| Damping for the analogue output dAA[s] | 0...99.99 |
| Software / programming | |
| Parameter setting options | display can be rotated and switched off; analogue output selectable and scalable; Teach function; simulation function; diagnostic function |
| Interfaces | |
| Communication interface | IO-Link |
| IO-Link revision | 1.1.3 |
| SDCI standard | IEC 61131-9: 2019-06 |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 1 |
| Process data binary | 2 |
| IO-Link resolution pressure[bar] | 0.001 |
| IO-Link process data (cyclical) | |
| function | bit length |
| pressure | 16 |
| device status | 4 |
| SSC1.1 | 1 |
| SSC1.2 | 1 |
| IO-Link functions (acyclical) | application specific tag; internal temperature; Medium temperature |
| Supported DeviceIDs | |
| Type of operation | DeviceID |
| default | 1717 |
| Operating conditions | |
| Ambient temperature | |
| 0...60 °C | 32...140 °F |
| Storage temperature | |
| -25...85 °C | -13...185 °F |
| Protection | IP 65 |
| Tests / approvals | |
| EMC | |
| DIN EN 61326-1 | |
| Shock resistance | |
| DIN EN 60068-2-27 | 50 g (11 ms) |
| Vibration resistance | |
| DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
| UL approval | |
| UL approval no. | J067 |
| File number UL | E174189 |
| Pressure Equipment Directive | Sound engineering practice; can be used for stable gases fluid group 2 |
| Mechanical data | |
| Weight[g] | 53.1 |
| Housing | rectangular |
| Dimensions[mm] | 37.7 x 30 x 38.6 |
| Materials | PBT; PC; TPE; NBR; FKM; brass; silicon (coated) |
| Materials (wetted parts) | PBT; FKM; brass; silicon (coated) |
| Min. pressure cycles | 50 million |
| Process connection | threaded connection 1/8" NPT internal thread (2x) |
| Displays / operating elements | |
| Display | |
| Display 1" | 128 x 96 pixels |
| switching status | 1 x LED, yellow |
| Display unit | bar; MPa; psi; mmHg; inHg; kgf/cm² |
| Accessories | |
| Items supplied | head cap screw: 2 x (M3 x 8 mm) |
| Remarks | |
| Pack quantity | 1 pcs. |
| Electrical connection | |
| Connector | 1 x M8; coding: A; Contacts: 4, gold-plated |
下载资料
- PQC612 (638 KB)