IFM
IFM PN2592 压力传感器
带显示屏的压力传感器
IFM PN2592 压力传感器 — datasheet、规格参数、订货号查询与原装正品采购
获取报价 / 询盘
产品亮点
- 两个开关输出，其中一个可编程为 IO-Link，另一个可作为模拟输出
- 红/绿显示，用于明确标识可接受的范围
- 管路连接可进行旋转，方便进行最佳的排列
- 高负载保护，长期稳定性
- 坚固的设计，适用于严苛的工业环境
- 方便的按钮操作或通过IO-Link进行参数设置
产品概述
| 产品标识 | 电子压力传感器 |
| 应用 | 用于工业应用 |
| 系统接口 | 螺纹连接 G 1/4 外螺纹 (DIN EN ISO 1179-2); 内螺纹:M5 |
| 工作电压DC | 18...30 V |
| 电压类型 | DC |
| 电气设计 | PNP/NPN |
| 输出数量 | 2 |
| 输出功能 | 常开/常闭; (可设定参数); 模拟 |
| 输出信号 | 开关信号; 模拟信号; IO-Link; (可配置) |
| 模拟电流输出 | 4...20; (可调整量程 1:5) mA |
| 模拟电压输出 | 0...10; (可调整量程 1:5) V |
| 测量范围 | 0...100 bar0...1450 psi0...10 MPa |
| 接口 | M12 接插件 |
| 原材料 | 不锈钢(1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC |
| 材料(接液部件) | 不锈钢(1.4404 / 316L); Al2O3 (陶瓷); FKM |
| 显示 | 显示单位: 3 x LED 绿色 (bar, psi, MPa); 开关状态: 2 x LED 黄色; 测量值: 字母数字显示 红色/绿色 4位数字 |
| 环境温度 | -25...80 °C |
| 介质温度 | -25...80 °C |
| 通信接口 | IO-Link |
| 产品 | 易福门或同价值的 |
| 型号 | PN2592 |
技术规格
| Product characteristics | |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range | 0...100 bar 0...1450 psi 0...10 MPa |
| Process connection | threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5 |
| Application | |
| Special feature | Gold-plated contacts |
| Measuring element | ceramic-capacitive pressure measuring cell |
| Application | for industrial applications |
| Media | Liquids |
| Conditionally suitable for | use in gases at pressures > 25 bar only on request |
| Medium temperature[°C] | -25...80 |
| Min. burst pressure | 650 bar 9400 psi 65 MPa |
| Pressure rating | 300 bar 4350 psi 30 MPa |
| Vacuum resistance | |
| -1000 mbar | -0.1 MPa |
| Type of pressure | relative pressure |
| Electrical data | |
| Operating voltage[V] | 18...30 DC; (to SELV/PELV) |
| Current consumption[mA] | < 35 |
| Min. insulation resistance[MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] | 0.3 |
| Integrated watchdog | yes |
| Inputs / outputs | |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Outputs | |
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] | 2 |
| Permanent current rating of switching output DC[mA] | 250 |
| Switching frequency DC[Hz] | < 500 |
| Number of analogue outputs | 1 |
| Analogue current output[mA] | 4...20; (scalable 1:5) |
| Max. load[Ω] | 500 |
| Analogue voltage output[V] | 0...10; (scalable 1:5) |
| Min. load resistance[Ω] | 2000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Measuring/setting range | |
| Measuring range | 0...100 bar 0...1450 psi 0...10 MPa |
| Analogue start point | 0...80 bar 0...1160 psi 0...8 MPa |
| Analogue end point | 20...100 bar 290...1450 psi 2...10 MPa |
| Factory setting / CMPT = 2 | |
| Set point SP | 0.6...100 bar 10...1450 psi 0.06...10 MPa |
| Reset point rP | 0.2...99.6 bar 4...1444 psi 0.02...9.96 MPa |
| Min. difference between SP and rP | 0.6 bar 6 psi 0.06 MPa |
| In steps of | 0.2 bar 2 psi 0.02 MPa |
| Status_B High Resolution / CMPT = 3 | |
| Set point SP | 0.6...100 bar 9...1450 psi 0.06...10 MPa |
| Reset point rP | 0.2...99.6 bar 3...1444 psi 0.02...9.96 MPa |
| Min. difference between SP and rP | 0.5 bar 6 psi 0.05 MPa |
| In steps of | 0.1 bar 1 psi 0.01 MPa |
| Accuracy / deviations | |
| Switch point accuracy[% of the span] | < ± 0,4; (Turn down 1:1) |
| Repeatability[% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation[% of the span] | < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis deviation[% of the span] | < ± 0,1; (Turn down 1:1) |
| Long-term stability[% of the span] | < ± 0,05; (Turn down 1:1; per 6 months) |
| Temperature coefficient zero point[% of the span / 10 K] | < ± 0,2; (-0...80 °C) |
| Temperature coefficient span[% of the span / 10 K] | < ± 0,2; (-0...80 °C) |
| Notes on the accuracy / deviation | switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1% |
| Response times | |
| Response time[ms] | < 1.5 |
| Delay time programmable dS, dr[s] | 0...50 |
| Damping process value dAP[s] | 0...4 |
| Damping for the analogue output dAA[s] | 0...4 |
| Max. response time analogue output[ms] | 3 |
| Software / programming | |
| Parameter setting options | hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output |
| Interfaces | |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| SIO mode | yes |
| Required master port type | A; (when pin 2 not connected: B) |
| Supported DeviceIDs | |
| Type of operation | DeviceID |
| Factory setting / CMPT = 2 | 461 |
| Status_B High Resolution / CMPT = 3 | 972 |
| Note | For further information please see the IODD PDF file under "Downloads" |
| Factory setting / CMPT = 2 | |
| Profiles | |
| Smart Sensor - SSP 0 | Generic Profiled Sensor |
| Function | Device identification |
| Function | Process data variable |
| Function | Device diagnosis |
| Min. process cycle time[ms] | 2.3 |
| IO-Link resolution pressure[bar] | 0.1 |
| IO-Link process data (cyclical) | |
| function | bit length |
| pressure | 14 |
| binary switching information | 2 |
| IO-Link functions (acyclical) | application specific tag |
| Status_B High Resolution / CMPT = 3 | |
| Profiles | |
| Smart Sensor - SSP 3.1 | Measuring Sensor |
| Common - I&D | Identification and Diagnosis |
| Min. process cycle time[ms] | 3 |
| IO-Link resolution pressure[bar] | 0.05 |
| IO-Link process data (cyclical) | |
| function | bit length |
| pressure | 16 |
| device status | 4 |
| binary switching information | 2 |
| IO-Link functions (acyclical) | application specific tag |
| Operating conditions | |
| Ambient temperature[°C] | -25...80 |
| Storage temperature[°C] | -40...100 |
| Protection | IP 65; IP 67 |
| Tests / approvals | |
| EMC | |
| DIN EN 61000-6-2 | |
| DIN EN 61000-6-3 | |
| Shock resistance | |
| DIN EN 60068-2-27 | 50 g (11 ms) |
| Vibration resistance | |
| DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
| MTTF[years] | 138 |
| UL approval | |
| UL approval no. | J013 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Mechanical data | |
| Weight[g] | 300 |
| Housing | cylindrical |
| Dimensions[mm] | Ø 34 / L = 92.7 |
| Materials | stainless steel (316L/1.4404); PBT+PC-GF30; PBT-GF20; PC |
| Materials (wetted parts) | stainless steel (316L/1.4404); Al2O3 (ceramics); FKM |
| Min. pressure cycles | 100 million |
| Tightening torque[Nm] | 25...35; (recommended tightening torque; depends on the lubrication, the seal and the pressure load) |
| Process connection | threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5 |
| Process connection sealing | FKM (DIN EN ISO 1179-2) |
| Restrictor element integrated | no (can be retrofitted) |
| Displays / operating elements | |
| Display | |
| Display unit | 3 x LED, green (bar, psi, MPa) |
| switching status | 2 x LED, yellow |
| measured values | alphanumeric display, red/green 4-digit |
| Remarks | |
| Pack quantity | 1 pcs. |
| Electrical connection | |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |
下载资料
- PN2592 (451 KB)