IFM

IFM PN2043 压力传感器

带显示屏的压力传感器

IFM PN2043 压力传感器 — datasheet、规格参数、订货号查询与原装正品采购

获取报价 / 询盘

立即询价 WhatsApp 询盘邮件询价

产品亮点

两个开关输出，其中一个可编程为 IO-Link，另一个可作为模拟输出
红/绿显示，用于明确标识可接受的范围
管路连接可进行旋转，方便进行最佳的排列
高负载保护，长期稳定性
坚固的设计，适用于严苛的工业环境
方便的按钮操作或通过IO-Link进行参数设置

产品概述

产品标识	电子压力传感器
应用	用于工业应用
系统接口	螺纹连接 G 1/4 内螺纹 (DIN EN ISO 1179-2)
工作电压DC	18...30 V
电压类型	DC
电气设计	PNP/NPN
输出数量	2
输出功能	常开/常闭; (可设定参数); 模拟
输出信号	开关信号; 模拟信号; IO-Link; (可配置)
模拟电流输出	4...20; (可调整量程 1:5) mA
模拟电压输出	0...10; (可调整量程 1:5) V
测量范围	0...40 bar0...580 psi0...4 MPa
接口	M12 接插件
原材料	不锈钢(1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC
材料(接液部件)	不锈钢(1.4404 / 316L); Al2O3 (陶瓷); FKM
显示	显示单位: 3 x LED 绿色 (bar, psi, MPa); 开关状态: 2 x LED 黄色; 测量值: 字母数字显示红色/绿色 4位数字
环境温度	-25...80 °C
介质温度	-25...80 °C
通信接口	IO-Link
产品	易福门或同价值的
型号	PN2043

技术规格

Product characteristics
Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Measuring range	0...40 bar 0...580 psi 0...4 MPa
Process connection	threaded connection G 1/4 internal thread (DIN EN ISO 1179-2)
Application
Special feature	Gold-plated contacts
Measuring element	ceramic-capacitive pressure measuring cell
Application	for industrial applications
Media	liquids and gases
Conditionally suitable for	use in gases at pressures > 25 bar only on request
Medium temperature[°C]	-25...80
Min. burst pressure	500 bar 7200 psi 50 MPa
Pressure rating	200 bar 3000 psi 20 MPa
Vacuum resistance
-1000 mbar	-0.1 MPa
Type of pressure	relative pressure
Electrical data
Operating voltage[V]	18...30 DC; (to SELV/PELV)
Current consumption[mA]	< 35
Min. insulation resistance[MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Power-on delay time[s]	0.3
Integrated watchdog	yes
Inputs / outputs
Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Outputs
Total number of outputs	2
Output signal	switching signal; analogue signal; IO-Link; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC[V]	2
Permanent current rating of switching output DC[mA]	250
Switching frequency DC[Hz]	< 500
Number of analogue outputs	1
Analogue current output[mA]	4...20; (scalable 1:5)
Max. load[Ω]	500
Analogue voltage output[V]	0...10; (scalable 1:5)
Min. load resistance[Ω]	2000
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes
Measuring/setting range
Measuring range	0...40 bar 0...580 psi 0...4 MPa
Set point SP	0.3...40 bar 5...580 psi 0.032...4 MPa
Reset point rP	0.1...39.8 bar 2...577 psi 0.012...3.98 MPa
Analogue start point	0...32 bar 0...464 psi 0...3.2 MPa
Analogue end point	8...40 bar 116...580 psi 0.8...4 MPa
Min. difference between SP and rP	0.2 bar 3 psi 0.02 MPa
In steps of	0.1 bar 1 psi 0.001 MPa
Accuracy / deviations
Switch point accuracy[% of the span]	< ± 0,8; (Turn down 1:1)
Repeatability[% of the span]	< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation[% of the span]	< ± 0,4 (BFSL) / < ± 0,8 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting)
Hysteresis deviation[% of the span]	< ± 0,1; (Turn down 1:1)
Long-term stability[% of the span]	< ± 0,05; (Turn down 1:1; per 6 months)
Temperature coefficient zero point[% of the span / 10 K]	< ± 0,2; (-0...80 °C)
Temperature coefficient span[% of the span / 10 K]	< ± 0,2; (-0...80 °C)
Notes on the accuracy / deviation	switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%
Response times
Response time[ms]	< 1.5
Delay time programmable dS, dr[s]	0...50
Damping process value dAP[s]	0...4
Damping for the analogue output dAA[s]	0...4
Max. response time analogue output[ms]	3
Software / programming
Parameter setting options	hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output
Interfaces
Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Profiles
Smart Sensor - SSP 3.1	Measuring Sensor
Common - I&D	Identification and Diagnosis
SIO mode	yes
Required master port type	A; (when pin 2 not connected: B)
Min. process cycle time[ms]	3
IO-Link resolution pressure[bar]	0.02
IO-Link process data (cyclical)
function	bit length
pressure	16
device status	4
binary switching information	2
IO-Link functions (acyclical)	application specific tag
Supported DeviceIDs
Type of operation	DeviceID
default	1201
Note	For further information please see the IODD PDF file under "Downloads"
Operating conditions
Ambient temperature[°C]	-25...80
Storage temperature[°C]	-40...100
Protection	IP 65; IP 67
Tests / approvals
EMC
DIN EN 61000-6-2
DIN EN 61000-6-3
Shock resistance
DIN EN 60068-2-27	50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6	20 g (10...2000 Hz)
MTTF[years]	166
UL approval
UL approval no.	J013
File number UL	E174189
Pressure Equipment Directive	Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Mechanical data
Weight[g]	282.5
Housing	cylindrical
Dimensions[mm]	Ø 34 / L = 90.7
Materials	stainless steel (316L/1.4404); PBT+PC-GF30; PBT-GF20; PC
Materials (wetted parts)	stainless steel (316L/1.4404); Al2O3 (ceramics); FKM
Min. pressure cycles	100 million
Tightening torque[Nm]	25...35; (recommended tightening torque; depends on the lubrication, the seal and the pressure load)
Process connection	threaded connection G 1/4 internal thread (DIN EN ISO 1179-2)
Restrictor element integrated	no (can be retrofitted)
Displays / operating elements
Display
Display unit	3 x LED, green (bar, psi, MPa)
switching status	2 x LED, yellow
measured values	alphanumeric display, red/green 4-digit
Remarks
Pack quantity	1 pcs.
Electrical connection
Connector	1 x M12; coding: A; Contacts: 4, gold-plated

下载资料

PN2043 (403 KB)